Epiroc makes the ‘impossible possible’ with launch of Boltec ABR

0
78

Epiroc has taken another significant step forward in its rock reinforcement automation journey with the release of the Boltec Auto Bolt Reload (ABR).

Combining the company’s ground support nous with its mechanisation and automation knowledge has resulted in a solution able to remove operators from the front end of the bolter – where personnel are most at risk of rock falls from unsupported ground – and increase bolting productivity, especially in poor ground conditions.

With mining operations steadily going deeper as they develop existing and newly discovered orebodies, the rock stresses associated with mining these orebodies are typically increasing, too. This often results in more challenging rock conditions with fractured rock mass, rock burst and squeezing ground, requiring more regular rehabilitation work. The Boltec ABR, with improved operator safety, flexibility and productivity, is the obvious choice for such conditions, Epiroc says.

Epiroc claims the Boltec ABR is the first ever underground rock reinforcement drill rig designed in such a way that the bolt type and machine work together in synergy to deliver optimal safety, performance and quality. The machine can also be equipped with a mesh delivery system.

This synergy also leads to improved accuracy in bolt installations and a reduced need for re-bolting, according to Peter Bray, Global Product Manager, Rock Reinforcement at Epiroc’s Underground division.

“By using a Boltec ABR, you are better able to install bolts and mesh correctly with high quality, reducing the need for re-bolting, re-meshing…and rehab work in the future,” he told attendees of a webinar announcing the product launch today.

The mechanisation of the bolting process – in tandem with the use of self-drilling anchors (SDAs) and pumpable resin – should provide operations with the comfort to follow recommended bolting patterns, reducing the need for the installation of additional bolts that go above and beyond optimal industry practice.

The main design feature of the Boltec ABR is the fully mechanised bolt reloading system. The system automatically feeds bolts from a large carrier magazine – able to hold 44 bolts in 2.4-m or 3-m lengths – to the feed magazine – able to hold eight bolts – all while the operator remains safe inside the cabin. This innovation removes the need for manually reloading the feed magazine, thereby reducing the associated risk to the operator.

The fast auto reloading sequence speeds up the production cycle, with a total of 52 bolts able to be installed in a heading before manual reloading of the carrier magazine. The carrier magazine is mounted on a swing arm that lowers the magazine to ground level for easy reloading behind the machine’s front support jacks – where ground support should already be in place.

Productivity can be further boosted with the operator carrying out the reloading process when bolting is being carried out in multi-bolt auto mode, according to Bray.

LEAVE A REPLY

Please enter your comment!
Please enter your name here