970×90
Call us today on +27 11 044 8985/6 or email info@fmdrc-zambia.com

BMG’s Tsubaki Workhorse elevator chains and backstop cam clutches for inclined conveyors and bucket elevators

BMG’s extensive range of Tsubaki high performance chain, which offers enhanced strength and reliability, a cleaner environment and extended operating life, includes the robust Workhorse elevator series.

“Workhorse elevator chains, manufactured for greater strength and durability, are designed to resist the abrasive and demanding forces of aggregate elevators. This chain is particularly well suited for use in aggressive bulk material handling environments with harsh fine particulates like cement, lime, gypsum, coal, fertilizer, grain and sugar,” says Carlo Beukes, business unit manager, power transmission, BMG. “Carefully selected high strength steels, advanced manufacturing processes and refined heat treatments, ensure maximum fatigue strength and protection against failure, even when these chains are used in the most severe applications.”

The Workhorse 5800 and 5900 series, with average tensile strength ratings (ATS) between

65 909 kg and 129 545 kg, can be upgraded with various plated pins, bushings and joint seals – individually or in combination – to ensure dependability and enhanced wear resistance in specific applications.

An important feature of this series is that extended bushing barrier seals prevent abrasive materials from entering and attacking chain joints. The chain bushings are extended beyond the inside sidebars to minimise the clearance between the outside bars and the bushings. This in turn creates a solid barrier that inhibits abrasive material from entering the pin/bushing joint.

The wide face seal, which is manufactured from a high temperature engineered polymer, encircles the extended bushing and provides an additional particulate resistant barrier to help protect the joint, thus minimising contamination.

A patented stainless steel internal ring seal holds tight onto the pin and rotates within a groove in the bushing to create a labyrinth to prevent debris from getting into the pin/bushing area.

Tsubaki standard backstops – designed for safety in normal low speed conveyor applications –  offer a simple and cost effective means to protect capital equipment, including inclined conveyors and bucket elevators.

These uniquely designed backstop cam clutches prevent reverse rotation of for instance, the head pulley of an incline conveyor, thus acting as critical safety equipment, as well as avoiding damage to machinery and expensive equipment.

Maintenance benefits – BS135 (135 mm shaft size) and smaller units are greased for life, with no maintenance required. Bigger units only require lubrication once every 4 000 to 8 000 hours, depending on environment. Old grease can be flushed out and changed, while the unit is in operation –  there is no need to remove the backstop from the shaft.

BMG carries a complete range of up to 250 mm shaft size in stock, which is available in short lead times.

BMG’s technical team advises on the selection of the correct cam clutch for each application and the appropriate installation and usage for optimum performance and improved safety standards. For extended service life, correct lubrication methods and dust prevention care are also critical.

For long overland conveyors, Tsubaki’s BS-HS (High speed capacity) back stop cam clutch series has many critical features not found in conventional models. This range has an upgraded cam cage and bearing supported design, which provides much higher torque/speed capacity than other cam clutches.

Other advantages include the use of a smaller clutch, which provides cost savings and high quality clutch component parts made from heat treated alloy steel that provides wear resistance and extended life performance.

These back stop cam clutches also have an anti-roll over cam design that ensures durability against heavy shock load in back stopping. The dust proof construction of this series – with the combination of a double lip oil seal and dust protective plate – keeps grease in and dust out.

Another important feature of the BS-HS series is reduced maintenance. Because special heat resistant grease (No EP additives) is packed into the unit as standard, only minimal maintenance for the lubricant is required since. This makes maintenance easier and significantly reduces operational costs.

Tsubaki’s complete range of cam clutches is available from BMG in different capacities and styles designed to provide the best functional characteristics for three basic modes of operation – overrunning, indexing and backstopping.

The outer and inner races of these cam clutches are manufactured from high quality alloy steel, with high surface hardness and core toughness, to be able to withstand operation in arduous conditions. These races are precision ground, providing excellent concentricity and a special surface finish to obtain accurate cam rotation. Cams are manufactured from special selected high alloy steel, with a hardness option up to 2 500 Hv.

Workhorse chains are manufactured by Tsubaki USA and are generally available from BMG in South Africa, within six weeks after receipt of order. This makes planning a lot easier for plant maintenance.

The complete range of Tsubaki power transmission components is available from BMG’s national branch network, which offers a technical advisory and 24 hour back-up service

About The Author

Related posts

Leave a Reply

Your email address will not be published. Required fields are marked *